|
VideoSpider
Before reading any further or contacting Darim Technical Support make sure that
you are using the latest software available from Darim. Your problem may be already
solved by the newer software version.
Click on the links below to download the most recent files.
The latest software and updates
Here you can download latest builds and bugfix releases for
VideoSpider system.
b718_Sp1xxSrv.exe
|
3.1 Mb
|
VideoSpider server software for SP1xx capture cards (2008/04/14).
|
|
b718_Sp408Srv.exe
|
3.0 Mb
|
VideoSpider server software for SP408 capture cards (2008/04/14).
|
b718_Sp4XXSrv.exe
|
3.5 Mb
|
VideoSpider server software for all other SP4xx capture cards (2008/04/14).
|
b718_SpClient.exe
|
6.5 Mb
|
VideoSpider client software for all types of capture cards (2008/04/14).
|
b714_SPHDP.exe
|
0.5 Mb
|
VideoSpider software for Darim Hardware HD Decoder SD4 (2007/07/01).
|
SpPVE400_b718.exe
|
13.5 Mb
|
Demo version of VideoSpider server software for the tortable wireless camera PVE400 (2007/11/16).
|
spdotnet.exe
|
1 Mb
|
The new communication layer for client-server interaction - .Net Remoting.
Setup file for VideoSpider server AND client.
This setup is applicable to build 697 (b697_xxxxxx) and later versions.
ATTENTION! This feature works ONLY if you have Microsoft(c)
.NET v2.0 Framework installed on your computers. You can download one
from our server. (2006/02/21).
|
SPIDERdotNET.ppt
|
157 KB
|
.Net Remoting presentation file (2006/02/20).
|
dotnetfx.exe
|
22.4 Mb
|
Microsoft(c) .NET v2.0 Framework redistributable (2006/04/04).
|
Darim Vision presents an MPEG4 update for SP118 boards.
This update converts on the fly a stream being captured from MPEG1 to the MPEG4 format
that reduces the bit rate value (for the same quality) by 30-50 percent. This leads to
decrease in network traffic and storage space that can be used for storing more
recorded video. Stream conversion needs some additional CPU loading (20-30%) but
this is not critical for modern P3-P4 CPUs.
A trial server-side patch isn't available now.
On a client side, for version of Spider client prior to 2.50, you should
install a patch spclump4.exe (that installs MPEG4 decoder) to get able to
view MPEG4 video data. Note, this client-side patch has no time limitation
so you may leave it installed even after the server side uninstallation
- it will not somehow influence MPEG1 mode operation.
Documentation
SpiderIG.pdf
|
860 KB
|
VideoSpider Installation Guide Rev 7.0b in PDF format (2004/01/08).
Contains important system requirements, useful recommendations, detailed
installation and upgrade instructions as well as troubleshooting suggestions.
Requires Adobe Acrobat Reader 4.0 or later in order to be viewed or
printed.
|
SpiderUG.pdf
|
1588 KB
|
VideoSpider User Guide Rev 7.0b in PDF format (2004/01/08).
A comprehensive user's manual that covers all issues concerning the VideoSpider
system operation from step-by-step instructions to detailed descriptions of every
fine point. The FAQs sheet is enclosed.
Requires Adobe Acrobat Reader 4.0 or later in order to be viewed or
printed.
|
spider.chm
|
791 KB
|
VideoSpider Online Help in Compressed HTML format (2003/10/31).
Online Help reference, provides concise content of VideoSpider User's Guide, some parts of the Installation Guide and supplementary information.
Requires Microsoft Internet Explorer 4.0 or later in order to be viewed
|
Additional information
|
whatsnew.txt
|
27 KB
|
What's New information for build/release (2007/09/25).
|
|
readme.txt
|
3 KB
|
Last minute installation, upgrade and usage notes (2003/10/30).
|
|
specification.xls
|
31 KB
|
Technical specs of the VideoSpider turnkey solutions and capture cards available
(2004/01/08).
|
|
space consumption.xls
|
34 KB
|
Contains required storage space considerations when recording video data from a
certain video source (2004/01/08).
|
Also, visit
Forum to find answers to most typical and some specific questions.
Can not seem to find the solution on this page?
E-mail Darim Technical Support at
support@darim.com
and you will get it in the fastest way possible.
Please note, that our technical support staff will be able to help you
faster and with greater efficiency if you include the following information
in the description of your question or problem:
- The model of DVSx server you have the question about
- The basic computer configuration (CPU model, clock speed number of CPUs (if more than one), amount of the physical RAM, other devices installed)
- The video adapter information (model, amount of video memory, display mode used)
- Network configuration description
- All other details as necessary.
|
