Hardware specifications :
- 4 BNC composite video inputs (1 Vp-p/75 Ohm)
- One full duplex audio channel: Microphone input and Speaker
output jacks (1/8 inch mono) connectors provided for external
electret-foil microphone and speaker.
- 2 RS-232 ports (9-pin D-SUB male). One RS-232 is for ext.
modem and another for PTZ function support.
- 8 inputs (TTL level) for external alarm sensors
- 4 relay outputs (0-400V AC/DC , 120 mA) that can operate on
alarm events: sensors activation, motion detection, video loss.
- Onboard Memory: 512 KB non-volatile compressed video/audio buffer.
Enough for storing of approx. 50 good quality images at
340x240 resolution
- Compact Flash type II socket – memory card is used as an
optional removable storage (up to 256MB)
- Video Input Type: NTSC, PAL, B/W 60 Hz, B/W 50 Hz
- Video Resolution: NTSC 640x480, 320x240, 160x120
PAL 720x576 360x288 180x144
- Video Compression: Wavelet
- Audio Compression: G723.1 5.3 Kbps
- Dimensions: 310mm x 140 mm x 56 mm (SeeHawk 5.1);
185mm x 142 mm x 35mm (SeeHawk 5.2)
(excluding connectors and mounting bracket)
- Power consumption: +12V/1.0A (requires external power supply)
Client System Requirements:
- Desktop or notebook PC with Pentium MMX 200 MHz CPU or better
- 64 MB or more RAM (96MB or more for Windows NT/2000/XP)
- Video Display configured for 800x600 resolution at 65K colors
or better
- Any 14.4 Kbps or faster (56 Kbps is recommended) modem connected
to a telephone line or mobile phone
- Microsoft Windows 95/98/NT/2000/XP operating system
|
