RECO-104
| Video Inputs |
4 BNC (1.0 Vp-p, 75 Ohm) and 1 S-Video |
| Video Outputs |
2 RCA (1.0 Vp-p, 75 Ohm) and 1 S-Video |
| Video Loopback |
4 BNC (with selectable 75 Ohm load) |
| Video Standards |
NTSC and PAL |
| Compression Type |
MPEG2 |
| Quality Settings |
Low(1.5Mbps), Medium(2.5Mbps), High(3Mbps), Super(4Mbps) |
| Resolution Settings |
352x480 or 704x480 (NTSC)
352x576 or 704x576 (PAL) |
| Selectable Frame Rate |
30, 15, 10, 4 fps (NTSC)
25, 12, 6, 4 fps (PAL)
3, 2, 1, 1/2, 1/5, 1/10, 1/15, 1/30 (Both) |
| Audio Inputs |
Left/Right line RCA (47 KOhm, unbalanced) |
| Audio Outputs |
Left/Right line RCA (600 Ohm, unbalanced) |
| Alarm Inputs |
4 (TTL level signal to terminal block) |
| Alarm Output |
1 (10A 125V AC, 6A 277V AC) |
| Recording Device |
IDE Hard Disk Drive |
| Recording Capacity |
20/40/80/120/160GB |
| Data Backup |
Using Removable HDD |
| Max. Recording Time |
21 Hours per 40GB HDD @max quality |
| Connection to PC |
RS-232 (9pin DSUB) - reserved |
| Input Voltage |
100-240V AC, 50/60 Hz |
| Power Consumption |
Approx. 50w |
| Dimensions (WxHxD) |
420 x 88 x 390 mm |
| Weight |
Approx. 6.6kg |
|
